Motley Crew Brushless FE Catamaran 2.4GHz RC Model Racing Boat

This is the DuraTrax Onyx 235 AC/DC Advanced Charger with Built-In Balancer. Combines the proven features of the Onyx 230 with balancing and other asked for extras.

Also charges LiPo, Li-Ion, and LiFe packs.

FEATURES: Charges 1-10 cell NiCd or NiMH (1.2 - 12V) cells and 1-4 cell LiPo Li-Ion or LiFe (3.7 - 14.8V) cells Balancing jack for up to 4 lithium cells Universal jack for charging radio batteries Detachable AC and DC input power cords USB jack for charging music players, cell phones and other accessories Mini USB jack for downloading firmware Custom CC/CV charge algorithm carfully charges Lithium Polymer, Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely Pushbutton controls and audible tones for easy setup and control Precise peak detection with automatic TRICKLE charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included Built-in fan for long lasting performance Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltges, peak voltage, charge current, charge capacity and time and more Small lightweight switching AC power supply delivers up to 5 amps of charge current Solid state reverse polarity and current overload safety devices FIVE YEAR warranty through Hobby Services (U.S.A. and Canada only) beginning at date of purchase

INCLUDES: DuraTrax Onyx 235 AC/DC Advanced Charger with Built-in Balancer and output adapters for Deans Ultra Plug, Traxxas and standard connectors, lithium balance adapters for ElectriFly and FlightPower/Thunder Power

REQUIRES: Charge Leads depending on type of battery;

DTXC2221 Charge Lead Banana to DNS Male DTXC2222 Charge Lead Banana to Traxxas DTXC2223 Chrge Lead Banana to Mini Plug HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY HCAP0105 JR Tx/Rx Charge Leads HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads GPMM3149 Charge Lead Banana/Deans Micro

SPECS: AC Input: 110V AC 60Hz - 240V 50Hz, detachable cord, 50W



DC Input: 11-15V detachable cord with alligator clips Battery Types: 1-10 NiCd or NiMH cells (1.2-12V) 1-4 cell LiPo, LiIon or LiFe (3.7-14.8V) Fast Charge Current: 0.1 - 8.0A linear (4C limit for Lithiums, 5A limit with AC input Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for Lithium Fast Charge Safety Timer: OFF-300 minutes NiCd/NiMH Peak Sensitivity: 3 - 20mV adjustable NiCd/NiMH Auto Trickle Current: Auto (1/20 fast charge settings) or manual(0 - 250mA) Battery Memories: 10 Protective Devices: Solid-state reverse polarity and current overload Case size: 6.3 x 5.3 x 1.7" (160 x 134 x 43mm) Weight: 19.7oz (559g) with DC cord attached

ElectriFly AC/DC TritonEQ Charger, Discharger and Cycler with Built-In Equalizer.

FEATURES: Charges 1-14 cell NiMH and NiCd cells and 1-6 cell LiPo, Li-Ion and LiFe (3.6, 3.7 or 3.3V cells) Peak detection technology for NiCd and NiMH batteries, and constant current/constant voltage technology for lithiums and lead-acid batteries Ideal for radio batteries and with charge currents adjustable from 100mA to 5 amps (limited to 1C for lithiums) it can also handle large power packs Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters (GPMM3200 and GPMM3201) Discharge cutoff voltage can be adjusted for NiCd/MH, and is fixed for lithiums and lead-acid batteries NiCd and NiMH trickle current is automatically set at 1/20th of the fast charge current setting Reversed LCD with backlight plus a 0-45° adjustable view angle clearly displays input and output volts, peak volts, individual lithium cell voltages, average discharge volts, charge and discharge capacity, currents and time, error messages and more Touchpad controls and super-simple programming make for simplicity and reliability Safety features include fast charge safety timer, current overload and reverse polarity protection One year limited warranty

INCLUDES: ElectriFly AC/DC TritonEQ with FlightPower and ElectriFly adapters, AC power cord, DC power cord with alligator clips and instruction manual

REQUIRES: Matching connector for discharge lead depending on battery HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY HCAP0105 JR Tx/Rx Charge Leads HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads GPMM3148 Charge Lead BANANA/DEANS MALE U GPMM3149 Charge Lead BANANA/DEANS MICRO DTXC2222 Charge Lead Banana Plugs To Traxxas Male

**A more complete list of connectors can be found in the Accessory Completion Guide**

SPECS: AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord) DC Input: 11-15.0V DC, with large alligator clips Number of Outputs: One, banana jacks Battery Types, # cells: 1-14 NiCd, NiMH 1-6 LiPo, Li-Ion, or LiFe (3.6, 3.7 or 3.3V cells) 2, 4, 6, 8, 10, 12V Pb (2V per cell) Fast Charge Current: 0.1-5.0A (1C maximum for lithiums) 63W max DC, 50W max AC Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and lithiums Trickle Current (NiCd/MH only): Chg current / 20 Peak Sensitivity (NiCd/MH only): 8mV NiCd, 5mV NiMH Peak Delay at Start (NiCd/MH only): 3 minutes Fast Charge Safety Timer: NiCd/MH 1.5 hours, lithiums 3 hours, or turn off Lithium Balancing Accuracy: 5mV per cell Lithium Balancing Connector: FlightPower and ElectriFly adapters included Lithium Max. Node Current: 300mA Discharge Current: 0.1-1.0A (5W max) Discharge Cutoff Voltage: NiCd, NiMH 0.1-16.8V LiPo, Li-Ion 3.0V per cell LiFe 2.5V per cell Pb 1.8V per cell Cycle Count (NiCd, NiMH only): 1-5 cycles Battery Memories: One Programming Controls: Membrane touchpad, 4 buttons Display Type: 2x16 reversed LCD w/backlight and adjustable angle Audible Indicators: Beeper Case Material: Aluminum and ABS plastic Safety Devices: Solid-state reverse polarity and overload Case Size: 5.9 x 6.0 x 2.3 in (150 x 153 x 58mm) Weight: 23.8oz (675g, w/o AC power cord)

This is the GrimRacer 2S 7.4V 5000mAh 40C LiPo Battery from AquaCraft.

FEATURES: Designed and tested specifically for boat hulls and boat racing

INCLUDES: GrimRacer 2S 7.4V 5000mAh 40C LiPo Battery with Deans Ultra Discharge Connector and ElectriFly style Balancing Plug

REQUIRES: LiPo compatible charger and balancer

SPECS: Voltage Rating: 7.4V Cells: 2 Rated Capacity: 5000mAh Discharge Rating: 40C Continuous, 80C Surge Max. Recommended Charge Rate: 1C (5.0A) Discharge Lead: 10 gauge wire with Deans Ultra connector Balancing Plug: ElectriFly style Dimensions: 6.34 x 1.77 x 0.75" (158 x 43 x 19mm) Weight: 10.3oz (291g)

This is the Traxxas Power Cell 7.4V 4200mAh 25C 2S LiPo Battery.

FEATURES: Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models 12AWG multi strand wire is soldered directly to the LiPo cells eliminating increased resistance from bullet connectors and accidental reversed polarity connections

INCLUDES: Traxxas Power Cell 7.4V 4200mAh 25C LiPo 2S Battery with High Current Connector and JST/XH Balance Plug

REQUIRES: Balancer and LiPo compatible charger or LiPo charger with built-in balancer such as the Onyx 235, DTXP4235 LiPo charging bag

SPECS: Configuration: 2S2P Continuous Discharge: 25C (105A) Max Burst Rate: 50C (210A) Watt Hours: 31.08 Charge Rate: 1C (4A) Max Charge Rate: 2C (8A) Dimensions: 6.1 x 0.90 x 1.8" (155 x 23 x 45mm) Weight: 8.6oz (245g)

COMMENTS: ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Charge through the "To ESC or "DISCHARGE" lead NEVER Trickle Charge NEVER allow to Discharge below 2.5V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

This is the GrimRacer 2S 7.4V 4200mAh 30C LiPo Battery from AquaCraft.

FEATURES: Designed and tested specifically for boat hulls and boat racing

INCLUDES: GrimRacer 2S 7.4V 4200mAh 30C LiPo Battery with Deans Ultra Discharge Connector and ElectriFly style Balancing Plug

REQUIRES: LiPo compatible charger and balancer

SPECS: Voltage Rating: 7.4V Cells: 2 Rated Capacity: 4200mAh Discharge Rating: 30C Continuous, 60C Surge Max. Recommended Charge Rate: 1C (4.2A) Discharge Lead: 10 gauge wire with Deans Ultra connector Balancing Plug: ElectriFly style Dimensions: 5.28 x 1.65 x .75" (134 x 42 x 19mm) Weight: 8.25oz (234g)

COMMENTS: ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER allow LiPo cells to exceed 140°F (60°C) during charging NEVER Charge at currents greater than 1C NEVER Charge through the "To ESC or "DISCHARGE" lead NEVER Trickle Charge NEVER allow to Discharge below 2.5V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of the reach of children

This is bottle of Speed Grease from AquaCraft Models. Used to lubricate flex and direct drive prop shafts for electric and fuel powered boats.

FEATURES: Specially formulated "non-sling" properties Provides superior lubrication to reduce friction and wear Waterproof Blue lubricant

INCLUDES: One 2oz (59ml) bottle of grease

This is a package of two sections of Velcro Hook and Loop Material. (If you purchase extra battery packs, you are going to need to purchase extra hook and loop as well.)

INCLUDES: Two 1" x 6" strips of adhesive backed velcro.

This is the GrimRacer 42x55 Metal Boat Propeller from AquaCraft.

FEATURES: Constructed of high quality Copper-Beryllium-Titanium material that is rigid but not brittle and can be sanded and shaped with less effort than Stainless Steel props Copper-Beryllium-Titanium material stays sharper longer and is less prone to dulling and chipping True center bore hub with raised letters and numbering for easy identification Tumbled to remove any excess cast flashing

INCLUDES: GrimRacer 42x55 2-Blade Metal Boat Propeller

REQUIRES: Installing on propeller shaft

SPECS: Diameter: 42mm Pitch: 55mm Bore: 3/16"



CAUTION: Wear eye protection when tuning and working on metal boat propellers. Wear a respirator when filing or sanding these propellers. The dust produced is hazardous to your respiratory health.