Weathervane Mounting Information
NOTE: Roof mounts are not included
and must be ordered
separately.
Our weathervanes are made "cupola-ready". If you plan to
mount your weathervane directly on a roof, or against a
wall, or under an eave, you will need to purchase a
mounting bracket. We also offer garden poles, interior
wall brackets, desk and floor mounts.
USING A BRACKET OR ROOF MOUNT:
1.) Position roof
mount in needed location and mark where the
holes should be drilled. Drill the holes.
With a good quality silicone caulk, seal
between the roof mount and the roof.
Check that the roof mount is plumb,
then insert screws.
2.) With a hacksaw, cut the
post so that it is not more than 16"
above the roof mount.
Insert the post into the roof mount.
3.) Refer to weathervane assembly instructions to
complete installation.
