NOTE: Roof mounts are not included
and must be ordered
Our weathervanes are made "cupola-ready". If you plan to
mount your weathervane directly on a roof, or against a
wall, or under an eave, you will need to purchase a
mounting bracket. We also offer garden poles, interior
wall brackets, desk and floor mounts.
USING A BRACKET OR ROOF MOUNT:
1.) Position roof
mount in needed location and mark where the
holes should be drilled. Drill the holes.
With a good quality silicone caulk, seal
between the roof mount and the roof.
Check that the roof mount is plumb,
then insert screws.
2.) With a hacksaw, cut the
post so that it is not more than 16"
above the roof mount.
Insert the post into the roof mount.
3.) Refer to weathervane assembly instructions to